A-SUN 15/20/24/30 Tubes Pre-heated unpressurized stainless steel solar water heater system

group name: Pre-heating solar water heater

Min Order: 1 set

brand name: A-sun & Xianke

model: XKPH

Nearest port for product export: Shanghai, Ningbo

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, DDP, DDU, Express Delivery

Acceptable payment methods: T/T, L/C, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Thu, 20 Sep 2018 14:09:33 GMT

contact supplier

Paramtents

Warranty time 3 Years
Deliver Time 5-15 working days
Brand A-sun,OEM &ODM are acceptable
Life time 15 years
Material Zinc coating steel or Stainless steel
Capacity 100 - 360 liter
Trade Term FOB,CNF &CIF

Packging & Delivery

Min Order1 set

Briefing

A-SUN is a leading manufacturer of solar water heater and solar collector since 2000.

Detailed

Pre-heating Solar water heater

Installation Video

Prouduct Description

Feature

1. the cooper coil inside of the non-pressure tank can bear the pressure 0.7 Mpa during the operation.

2. there is feeder tank which can load the water automatically.

3. the vacuum tube heat the water and supply hot water to the tank, then the water in the copper coil can be heated by the hot water in the water tank.

4. it is pre-heating and heat exchange process.

5. only if the water in the tank is hot, more hot water will be got and exceed the capacity limit of the water tank.

6. clean hot water from the copper coil.

7. you can use the hot water inside of the copper coil or the hot water in the tank.

Model	Pre-heating solar water heater
Size	58*1800-15/18/20/24/30/36Tube
Capacity	150/180/200/240/300/360L
Inner tank	SUS304-2B 0.40mm-0.5mm,applies tig welding, the most advanced technology from South Korea.Inner tank is produced with longitudinal welding,which anti-leakage and anti-rust for more using life
Bath application	2-10 people
Outer tank	Zinc steel painted plate or stainless steel plate ,anti-corrision and anti-oxidation
Insulation layer	Imported PU layer 50-55mm with computer foaming,with 24 hours ripening process,and heat insulation material ACIR
Structure	Upper air vent hole,side prepared hole,side temperature sensor hole,lower inlet,electrical heater hole,diameter of water tank is 460/470/480mm
Frame	Zinc steel painted plate with width 10cm and thickness1.5mm,or stainless steel with width 10cm and thicknes s 1.2mm,angle 27/38/45,which defend against typhoon
Vacuum tube	Three target vacuum tube，with CU/SS-ALN coating film have high performance of absorb and low reflection ratio.
Fastener	Stainless steel screw
Silicon ring	High polymer silicon rubber
Reflector	0°/27°/38°/45°
Heating absorption temperature	50-99℃
Copper Coil	Diameter 12mm ×25-30M

Product Detail

Production Step

Technical Advantage